Back to the journal
21 November 2026

Limestone Cleaning: How to Clean Without Damaging the Stone

Limestone Cleaning: How to Clean Without Damaging the Stone

To clean limestone, you need warm water, a neutral pH detergent, a soft cloth, and to dry well at the end. Vinegar, lemon, and descaling products are off the list. The technique is simple, but the margin for error is small: a single acidic product leaves a dull mark that cannot be removed with any cleaning. In Lisbon, limestone is found in many homes, from the lioz of old stairs to the Moleanos of renovated kitchens. Therefore, those who do not have time to study the stone before grabbing the mop end up benefiting from a team that always works with the same method, visit after visit. Here we explain this method step by step, the mistakes that most damage the stone, and the situations where it is worth handing the work over to professionals.

In summary

  • Limestone is mainly made of calcium carbonate and reacts with acids. Vinegar, lemon, and many descalers permanently mark it.
  • In routine cleaning, it suffices to vacuum or sweep, wash with warm water and a small amount of neutral detergent, rinse with clean water, and dry.
  • A spill should be cleaned immediately, absorbing without scrubbing. Scrubbing spreads the stain into the stone.
  • Bathrooms, kitchens, tenant move-outs, and post-renovation are the moments when the stone is at the greatest risk. This is where a fixed method and a checklist make a difference.
  • The professionals at Cleaning Point in Lisbon follow detailed checklists, with fixed teams whenever possible, so that each visit meets the same standard.

Index

Why limestone requires special care

Limestone is a sedimentary rock. According to the Natural Stone Institute's care guide, it is mainly composed of calcium carbonate and is sensitive to acidic solutions. This is the point that changes everything. An acid does not just dirty or stain limestone: it dissolves a very thin layer of the surface. The result is that dull area, sometimes with the exact outline of a juice glass or a drop of glass cleaner, which no longer shines like the rest of the floor.

In Lisbon, this stone is everywhere. Lioz, for example, is a limestone from the Lisbon region and surroundings, mainly from Sintra, formed about 97 million years ago. It can be found in thresholds, steps, countertops, and floors of old buildings. In more recent works, Moleanos, a light cream limestone, is often seen. The manufacturers of this stone request that it be cleaned with neutral detergents and without any contact with acidic products, and warn that permanent contact with water or humidity can seriously damage it.

The confusion with the name "limestone"

Those searching for "limestone cleaning" mainly find tips for removing limescale from water, i.e., the white crusts on faucets and shower glass. The most common recipe is vinegar and water in equal parts. It works on a chrome faucet. On a floor or shower base made of limestone, it is exactly what you should not do, because the acid that dissolves the crust attacks the stone in the same way. They share the same name because they are chemically related, and that is why vinegar does not distinguish one from the other.

!

Polished, honed, or rustic finish

The finish changes how the stone shows errors. A polished limestone highlights any acid mark or scratch. A honed (matte and smooth) finish better disguises scratches but absorbs more and stains more easily. A rustic or aged finish accumulates dirt in the pores and requires a bit more attention to rinsing. Before choosing the product and tool, it is advisable to know what surface you are dealing with.

What to use and what to never use

Recommendations coincide among technical sources and Portuguese stone producers. The Natural Stone Institute advises a neutral cleaning product, stone soap, or a mild liquid detergent with warm water. MVC, a producer of Portuguese limestone, recommends a soft, damp cloth or a neutral pH stone product, and advises against aggressive chemicals, acidic substances, and abrasive tools.

Safe on limestoneTo avoid
Warm waterVinegar, lemon, juices, and soft drinks left on the stone
Neutral pH detergent or stone soap, well dilutedDescalers and bathroom descaling products
Mild liquid detergent, in small amountsPure bleach and strong degreasers
Soft microfiber clothGreen scrubbing pads, steel wool, abrasive powders
Clean mop, well wrungBuckets of dirty water reused from room to room
Dry cloth for the endLeaving the stone soaked to dry on its own

There is one detail that many people ignore: more detergent does not clean more. The Natural Stone Institute warns that excess soap or detergent leaves a film and marks on the surface, so the manufacturer's dosage should be respected. On a light stone, this film collects dust quickly, and the floor looks dirty two days after washing.

Routine cleaning, step by step

This is the method for limestone floors, countertops, and steps at home. Each step indicates what it requires and where it usually goes wrong.

  1. Dust and sand first. Vacuum or sweep with a soft broom before wetting. The sand brought in from the street acts like sandpaper under shoes and the mop. This is the most skipped step in hurried cleanings and the one that wears down the shine over time.
  2. Prepare the right solution. Warm water and neutral detergent in the amount indicated on the label, never "by eye." The typical mistake is using the same multipurpose product from the rest of the house, which may be too acidic or alkaline for the stone.
  3. Wash with a well-wrung cloth or mop. The Natural Stone Institute recommends a soft cloth on surfaces and a clean mop on floors. The stone should be damp, not flooded. On light limestone, excess water enters the pores and can leave rings as it dries.
  4. Rinse with clean water. Go over again with only clean water to remove detergent residues. Without this step, the soap film remains on the stone and traps the next dirt.
  5. Dry. Finish with a dry, soft cloth, especially on countertops, thresholds, and polished floors. Drying prevents water marks and reduces the time of moisture on the stone.
  6. Check the result. Look at the surface against the light. Dull areas, rings, or new stains should be seen immediately, before they set.

In a house with little free time, the problem is rarely not knowing the steps. The problem is completing them all, in every room, every week. In Cleaning Point's professional home cleaning, the routine follows a detailed checklist and, whenever possible, is done by the same team. Those who know their lioz floor from the first visit do not need to guess anything on the fifth. The list of what is done in each room is published in what we clean, room by room.

Stains: what to do in the first minutes

On limestone, speed matters more than the product. MVC advises treating spills immediately and cleaning without friction, to avoid spreading the stain. The Natural Stone Institute describes the same gesture: absorb with paper, without scrubbing, then wash with water and mild soap, rinse several times, and dry well.

!

Acidic spills: wine, juice, coffee, vinegar

Here there are two problems at once: the color that enters the pores and the acid that attacks the surface. Absorb immediately with kitchen paper, placing it without dragging. Then wipe with a damp cloth with clean water to dilute what remains and dry. The less time the liquid stays on the stone, the smaller the mark.

Grease and oil in the kitchen

Oil darkens limestone because it enters the pores. Absorb the excess, wash with warm water and neutral detergent, and dry. For persistent stains, MVC refers to a paste of baking soda and water: a thick paste applied over the stain that pulls dirt out of the stone as it dries. It should be done carefully, in a small area, and removed without scraping.

Dull marks: when the stain is not dirt

If the area is lighter and dull to the touch, but clean, it is probably not dirt. It is the surface attacked by an acid, and no detergent will return it to its previous state. That is why prevention weighs so much: bases under bottles and glasses on countertops, no bathroom products dripping on the floor, and attention to what is used for cleaning.

Bathroom and kitchen: where limestone suffers the most

The bathroom combines three risks: constant humidity, limescale crusts from water, and cleaning products designed for sanitary ware. It is common to see a shower base in dull stone precisely where a descaler for glass was applied. The solution lies in the order of work. Glass and faucet products are applied with a cloth, away from the stone, and the stone is cleaned separately, with neutral, rinsing, and drying. After a shower, passing a squeegee or cloth over the stone reduces standing water that ends up leaving deposits.

In the kitchen, the greatest risk comes from food acids and grease. Lemon, tomato, wine, and vinegar dressing fall on the countertop without anyone noticing. A quick daily cleaning with a damp cloth and neutral detergent, followed by drying, prevents most marks. A periodic deep cleaning addresses what routine cleaning does not reach: joints, skirting boards, furniture fronts over the stone, and the floor under movable appliances.

Sealing and inspection

MVC includes in the maintenance plan the inspection of damages and the periodic renewal of the stone sealing, without setting a fixed interval. A simple way to tell if the protection is still working is to drop a few water droplets in a discreet area: if the stone darkens quickly, it is absorbing. It is worth keeping this signal in mind when planning home maintenance.

Move-outs, post-renovation, and holiday homes

There are three moments when the limestone in a house in Lisbon tends to suffer more than at other times of the year.

Tenant move-in or move-out. After months without careful cleaning, the temptation is to attack everything with the strongest product available in the cupboard. In a house with thresholds and limestone floors, this risks the security deposit. Cleaning Point's move-in and move-out cleaning prepares the house for new occupants, with the same checklist standard as regular cleanings.

After renovations. Construction dust is fine and abrasive, and remnants of cement or mortar often lead to the use of acidic descalers, precisely what limestone cannot tolerate. Removing dust dry before wetting and cleaning in phases protects both new and old stone. This is the job of post-renovation cleaning.

Holiday homes and second residences. A house closed for weeks accumulates dust, and a rented house receives guests who do not know the stone. The Residence Care service takes care of secondary residences with access management and a digital report of each visit, so the owner knows the state of the house without having to go there.

Our point of view

Limestone is not difficult to clean. The challenge is cleaning it well every time. The steps fit into a paragraph: dust, wash with neutral, rinse, dry. The damages we find do not come from a lack of knowledge. They come from a rushed day, a swapped product, or someone cleaning the house for the first time who does not know that beautiful floor is lioz.

That is why we insist on consistency. Our teams are fixed whenever possible and follow detailed and transparent checklists, so the standard is the same regardless of the professional. The professionals are selected and trained by us, with no random third parties entering your home. When there is an issue, we resolve it quickly, and support is provided in multiple languages, which is very important for those who have a home in Lisbon but live in another country.

A stone that lasts centuries in a monastery can also last decades in a kitchen. It just takes those who clean it to do the same thing, the right way, every time.

Taras

Well-maintained limestone, without having to think about it

If your house in Lisbon has limestone floors, countertops, or stairs and you prefer not to take risks, Cleaning Point takes care of the routine for you: regular cleaning, deep cleanings, tenant move-ins and move-outs, post-renovation, and care for second residences. There are also extras, such as windows, ovens and appliances, upholstery, and balconies and terraces, which you can add to the visit.

Cleaningpoint

See the levels of care for each house or book a cleaning now.

Frequently asked questions

Can I use vinegar on limestone?

No. Limestone is mainly made of calcium carbonate and reacts with acids, and vinegar leaves dull areas that do not come off with cleaning. Save vinegar for faucets and glass and keep it away from the stone.

What detergent should I use on limestone floors?

A neutral pH detergent or a stone soap, diluted in warm water at the label's dosage. Excess leaves a film and marks, so use less than it seems necessary and always rinse with clean water at the end.

How to clean natural stone in general?

The principle applies to most natural stones sensitive to acids, such as marble and limestone: dust removed first, neutral product, soft cloth or mop, rinsing, and drying. Avoid abrasives and acids and treat spills immediately, absorbing without scrubbing.

Does bleach damage limestone?

Aggressive products should stay out of the limestone routine, and pure bleach falls into that category. For everyday hygiene, a well-rinsed neutral detergent cleans without putting the surface at risk.

How often should I clean limestone floors?

Dust and sand should be removed frequently, ideally several times a week in high-traffic areas, as they wear down the surface. Washing with neutral can be weekly in most homes, with periodic deep cleanings for joints, skirting boards, and hidden areas.

Sources

Natural Stone Institute: care and cleaning products for natural stone MVC: How to install and care for your limestone surfaces Ciencia Viva: Liós or lioz Grupo Ferrar: Moleanos Cream B2